Sawyer Point ZeroTwo Water Purifier

This filter is comprised of a large number of tiny “U” shaped hollow fiber micro-tubes with 0.02 micron absolute- size pores that trap contaminants as small as viruses, allowing the decontaminated water to pass freely.  The product weights around 0,340 – 0,513 Kg and has dimensions: 149 x 184 x 184 mm.

The Sawyer Point ZeroTwo Bucket Purification System kit includes: a Sawyer Point ZeroTWO™ 0.02 Micron Absolute Inline Water Purifier, a Hole cutter, Adapter, Hose, Filter Cleaner, Filter Hanger, and a Detailed instruction book.

To set up the Point ZeroTwo Water Purifier, a large container to fill with water (such as a standard 5-gallon polyethylene bucket, not included) must be used. The included drill bit must be used to cut a hole 1.5 inches from the bottom of the container. The adapters must then be installed onto the bucket, and the hose connected and snapped it into the Point ZeroTwo filter. To start the flow, the filter head must be lowered below the bottom of the bucket, and raised above the bucket to stop the flow. When not in use, the filter can be hung onto the side of the bucket with the included hanger. (For more information see assembly instructions)

Users are expected to maintain the product on their own, given that this product does not require any replacement components nor technical support to function or maintain. However if users require it, they can access Sawyer’s FAQs page or contact the manufacturer for questions or comments at customer@sawyer.com.

Manufacture claims the Sawyer Point ZeroTwo Water Purifier can last decades and can filter up to one million liters of water. This product includes a Lifetime Warranty against any manufacturing defects.

Testing performed by Hydreion Labs determined that the filter exceeds the requirements of the EPA Standards for removal of viruses by reducing the virus concentration by > 5.5 log units (Standard requires a minimum reduction of 4 log units).

Unknown